![]() |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Minn Kota Riptide SP Model Trolling MotorsFrom $689.99$50 Rebate until 7/1/2010
Riptide SPAvailable Thrust Levels
55, 70
|
| Control | CoPilot |
| Shaft Length | CoPilot |
| Prop | Weedless Wedge 2 |
| Composite Shaft | Yes |
| Digital Maximizer | Yes |
| Cool, Quiet Power | Yes |
RIPTIDE SP Saltwater Bow Mount Models
Available Models |
Max Thrust |
Volts |
Shaft Length |
Mount |
Control |
Speeds |
OUR PRICE |
Riptide SP 55CP
DM |
55 |
12V |
48" |
PowerDrive |
CoPilot |
Variable |
$689.99
|
Riptide SP 55CP AP
DM AP |
55 |
12V |
48" |
PowerDrive |
CoPilot |
Variable |
$889.99
|
Riptide SP 70CP
DM |
70 |
24V |
54" |
PowerDrive
|
CoPilot |
Variable |
$829.99
|
Riptide SP 70CP AP
DM AP |
70 |
24V |
54" |
PowerDrive
|
CoPilot |
Variable |
$1,029.99
|
DM=Digital Maximizer US2=Universal Sonar 2 AP=Auto Pilot
RIPTIDE SP Saltwater Bow Mount Features
Deploy-Assist LeverThe deploy-assist lever puts you in motion and in pursuit of fish quickly and easily. Depress the lever to deploy the motor and you’re ready to go. When it’s time to move, it stows easily and securely – ready for action whenever you are. |
![]() |
CoPilot (standard)Get the freedom to fish from anywhere on the boat with the wireless CoPilot™ accessory. The versatile remote lets you control speed, steering and prop on/off; can be mounted on your lanyard, rod or wrist. CoPilot replaces the traditional foot pedal. |
![]() |
AutoPilot (select models)AutoPilot™ locks onto any heading you choose and delivers you there. Infinitely variable steering adjustments provide smoother course corrections and tighter heading accuracy against wind, waves and current. Included on select models. |
![]() |
Digital MaximizerDigital Maximizer™ controls and optimizes power to extend battery life and reduce damaging heat. You’ll stay on the water up to five times longer on a single charge. |
![]() |
Advanced Corrosion ProtectionRiptide motors are impervious to saltwater’s corrosive effects, thanks to premium-grade marine alloys and aluminum upper arms. Metals undergo a rigid multi-step cleaning process before being anodized or coated with a special zinc dichromate armor plating. All components are then finished with a durable 5-mil TGIC polyester, powder coat paint. When it’s all done, you’re left with unequaled corrosion protection. |
![]() |
Indestructible Composite Shaft Guaranteed For Life!Pound for pound, our composite shaft is stronger than steel. It flexes on impact and won’t break, kink or corrode. That’s why we’re confident enough to make it the only trolling motor shaft that’s guaranteed for life. |
![]() |
Ergonomically Designed Foot Pedal (optional)Control speed, steering, and momentary and constant on/off with the Riptide SP foot pedal accessory. It features the industry’s highest IP68 waterproof rating, and is available in wired or wireless versions. Sold separately. |
![]() |
Full Encapsulated ElectronicsMarine-grade urethane fully encapsulates Riptide control boards to protect the electronic circuitry. Also, all electrical connections are sealed with liquid-tight heat shrink tubing to form an impregnable barrier against saltwater. |
![]() |
Weedless Wedge 2 Prop (select models)Push weeds away and take on the thick stuff without battery-draining chopping and hacking. Weedless Wedge™ 2 features swept-back, flared blades for unrelenting, reliable prop performance. Available on select models. |
![]() |
Cool, Quiet PowerNothing runs cooler or more quietly than a Minn Kota. Our extra large windings and commutators dissipate heat, resulting in cooler operation, extended battery power, and longer motor life. And our unique bearing system reduces friction to cut fish-spooking noise. So quiet, they’ll never hear you coming. |
![]() |
Sacrificial AnodeGalvanic corrosion occurs when two dissimilar metals come into electrical contact through saltwater. Riptide fights back with a patented sacrificial zinc anode, a composite shaft and properly balanced materials that are close in electrical potential. The result is a motor that’s completely protected from saltwater’s destructive forces. |
![]() |
Three-Year WarrantyThis motor is backed up with Minn Kota’s® three-year warranty. |
![]() |
RIPTIDE SP Saltwater Bow Mount Accessories
MK 110P Marine Portable Charger Take the power with you. Brings your batteries back to their proper charge quickly and conveniently. Offers recovery time of 4-6 hours. 7" length x 9" width x 7-3/4" height. Weighs just 6.5 pounds.
|
$71.99
|
| MK 220 On-Board Charger Get a fully automatic, "set it and forget it" proper charge every time. The MK 220 offers recovery time of 4-6 hours with 20 amps total output. 13-1/2" length x 7-1/2" width x 4" height. Weighs 15 pounds. 2 banks • 10 amps output per bank • 20 amps total output
|
$176.49 |
MKR-18 Trolling Motor Plug & Receptacle
|
$26.79 |
RTA-17 Quick Release BracketCompositeEasily remove your bow-mount motor with these high-yield composite brackets. They’re ultra-strong and corrosion-resistant. Their low-profile design leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (not included). Compatible with Riptide ST or Riptide SP models |
$66.99 |
PowerDrive V2/Riptide SP Foot PedalFor PowerDrive V2 or Riptide SP motors, this side-to-side steering foot pedal includes a momentary/constant on switch and a speed control knob for precise adjustments. Features an 18' cord with IP68-rated waterproof connector plugs. This pedal uses plug-n-play design for PowerDrive V2 or Riptide SP motors, and works in conjunction with CoPilot. Product code: 1866065
|
$62.95 |
Choosing the correct shaft length is important so that the angler’s electric motor does not cavitate, creating fish-spooking noise. The rule of thumb is that the center of the motor section should be submerged 9". In general, shaft length selection is more critical with bow-mount motors versus transom-mount motors. Most boat transoms are similar in their distance to the water, and Minn Kota’s standard transom shaft lengths should be adequate. With bow-mounted motors, there is much greater variation in shaft length requirements. Measure down from the mounting surface of the transom or bow to the water level. Add 5" to waterline measurement for fishing in rough water. Add 12" to waterline measurement for steering a hand control motor while standing. Use this measurement and the tables below to find the appropriate shaft length.
| Bow to Waterline | Recommended Shaft Length |
|---|---|
| 0"-10" | 36" |
| 16"-22" | 42" |
| 22"-28" | 48"-52" |
| 28"-34" | 54"-62 |
| Transom to Waterline | Recommended Shaft Length |
|---|---|
| 0"-10" | 30" |
| 10"-16" | 36" |
| 16"-20" | 42" |
| Over 22" | Consult Factory |
Thrust requirements are determined by the size and weight of your boat. As a rule of thumb:
However if you frequently fish in heavy winds, rivers or adverse weather conditions, you may want to consider a higher thrust electric motor. It’s always better to have too much power than not enough!
Minn Kota has a trolling motor selection guide on their web site where you can enter specifics about your boat and it will recommend a model that fits your input. You can access that site by clicking HERE.
The battery is a critical element of your electric motor system. A high-quality deep cycle marine battery should always be used. Unlike automobile batteries, deep cycle marine batteries are designed to be run down to a discharged state and then recharged. (To extend the life of your battery, always recharge after use. Most trolling motor batteries fail due to lack of proper charging.)
Boats do not tend to go in a straight line. Because of this, it is much easier to pull a boat than to push a boat. It is also easier to move the bow of the boat sideways compared to moving the transom. Therefore, a bow-mounted electric motor allows for much greater boat control and positioning. If quick-response boat control and positioning is what you are looking for, a Minn Kota bow-mount electric motor is a must.
No, there are no adapter cables for the CoPilot accessory.
In order to add AutoPilot in an older PowerDrive, in most cases, it will be necessary to replace the main control board, the coil cord, as well as the compass control board...due to the cost of the parts required, such a modification is not cost effective.
As long as you have the CoPilot system on your motor you will be able to program the wireless pedal with your CoPilot.
Your remote will communicate up to 25 feet.
Typically the batteries will last one year or at least two regular fishing seasons.
Model CR 2032 coin cell battery.
It requires two AA size non-alkaline batteries.
Minn Kota’s patented AutoPilot system (available on Terrova and PowerDrive V2 trolling motors) keeps you headed in the right direction by intelligently and automatically steering your boat. AutoPilot utilizes a patented, state-of-the-art compass system that locks onto a particular heading, and automatically and continuously makes adjustments to keep your boat moving in that direction.