Minn Kota Endura Model Trolling Motors

ENDURA C2 Freshwater Transom Mount Models

DM=Digital Maximizer   US2=Universal Sonar 2   AP=Auto Pilot IP=I-Pilot

ENDURA Freshwater Transom Mount Features

Power Prop (select models) The Power Prop delivers extra power to help you push through heavy vegetation. Fits 3-1/4" and 3-5/8" diameters. Available on select models.
Telescoping Handle Endura features an ergonomic, six-inch telescoping handle for comfortable, easy steering.
Lever Lock Bracket Our Lever Lock Bracket delivers a rock-solid mount that's stronger than conventional brackets. Special composite materials resist flexing, warping and UV damage
Two-Year Warranty This motor is backed up with Minn Kota's two-year warranty.
Advantage Camo Pattern On our Camo Waterfowl Edition, the Advantage MAX-4 HD pattern gives hunters maximum effectiveness in open terrain. The pattern incorporates cattails, millet, milo, corn stalks, oak and maple leaves, cedar and oak limbs, plus a variety of other plant life into the largest camouflage artwork on the market.
Indestructible Composite Shaft - Guaranteed For Life! Pound for pound, our composite shaft is stronger than steel. It flexes on impact and won't break, kink or corrode. That's why we're confident enough to make it the only trolling motor shaft that's guaranteed for life.
Tilt Twist Tiller Our Tilt Twist Tiller features a natural ergonomic grip to deliver the ultimate in hands-on control for speed and steering.
Weedless Wedge Prop (select models) The Weedless Wedge prop is 100% weedless. The leading edge on each propeller blade is shaped with a swept-back edge that always meets an angle of less than 45°. It "wedges" weeds away from the hub - even at slow fishing speeds. Available on select models.
Weedless Wedge 2 Prop (select models) Push weeds away and take on the thick stuff without battery-draining chopping and hacking. Weedless Wedge 2 features swept-back, flared blades for unrelenting, reliable prop performance.
Cool, Quiet Power Nothing runs cooler or more quietly than a Minn Kota. Our extra large windings and commutators dissipate heat, resulting in cooler operation, extended battery power, and longer motor life. And our unique bearing system reduces friction to cut fish-spooking noise. So quiet, they'll never hear you coming.
5 Speed 5-Speed motors put you in command with forward, reverse and multiple speed settings. Available on select models.
Two-Year Warranty - Camo Waterfowl Edition Camo Waterfowl Edition models are backed by Minn Kota's two-year warranty.

ENDURA Freshwater Transom Mount Accessories

• What about shaft length selection?
  

  Choosing the correct shaft length is important so that the angler's electric motor does not cavitate, creating fish-spooking noise. The rule of thumb is that the center of the motor section should be submerged 9". In general, shaft length selection is more critical with bow-mount motors versus transom-mount motors. Most boat transoms are similar in their distance to the water, and Minn Kota's standard transom shaft lengths should be adequate. With bow-mounted motors, there is much greater variation in shaft length requirements. Measure down from the mounting surface of the transom or bow to the water level. Add 5" to waterline measurement for fishing in rough water. Add 12" to waterline measurement for steering a hand control motor while standing. Use this measurement and the tables below to find the appropriate shaft length.

• Bow Guide

  

  Bow to Waterline	Recommended Shaft Length
  0"-10"	36"
  16"-22"	42"
  22"-28"	48"-52"
  28"-34"	54"-62

  Transom Guide

  

  Transom to Waterline	Recommended Shaft Length
  0"-10"	30"
  10"-16"	36"
  16"-20"	42"
  Over 22"	Consult Factory

• Electric motor power ratings are in pounds of thrust. How do I determine the thrust requirements for my boat?
  

  Thrust requirements are determined by the size and weight of your boat. As a rule of thumb:

• 40 lb. thrust max boat size 17 feet
• 50 lb. thrust max boat size 20 feet
• 55 lb. thrust max boat size 21 feet
• 65 lb. thrust max boat size 23 feet
• 70 lb. thrust max boat size 23 feet
• 80 lb. thrust max boat size 25 feet
• 101 lb thrust max boat size 25 feet

However if you frequently fish in heavy winds, rivers or adverse weather conditions, you may want to consider a higher thrust electric motor. It's always better to have too much power than not enough!

Minn Kota has a trolling motor selection guide on their web site where you can enter specifics about your boat and it will recommend a model that fits your input. You can access that site by clicking HERE.

• How important is battery selection for electric motor usage?>
  

  The battery is a critical element of your electric motor system. A high-quality deep cycle marine battery should always be used. Unlike automobile batteries, deep cycle marine batteries are designed to be run down to a discharged state and then recharged. (To extend the life of your battery, always recharge after use. Most trolling motor batteries fail due to lack of proper charging.)

• What are the benefits of a bow-mounted electric motor?
  

  Boats do not tend to go in a straight line. Because of this, it is much easier to pull a boat than to push a boat. It is also easier to move the bow of the boat sideways compared to moving the transom. Therefore, a bow-mounted electric motor allows for much greater boat control and positioning. If quick-response boat control and positioning is what you are looking for, a Minn Kota bow-mount electric motor is a must.

• Can my freshwater Minn Kota trolling motor be used in saltwater?
  

  We designed a special line of motors for use in salt or brackish water. The Minn Kota Riptide trolling motors have a number of "saltwater-engineered" enhancements, including stainless steel hardware, sealed electrical connections and an advanced painting process for improved corrosion protection. Using any of our standard Minn Kota motors in saltwater may dramatically reduce the life of the motor and voids manufacturer's warranty. To extend the life of your Minn Kota Riptide saltwater trolling motor, thoroughly rinse the motor with freshwater after every use in saltwater and store indoors. Never leave the motor submerged in saltwater when the boat is moored.

• Can the head or control box of my transom mount hand control motor be rotated for use on the bow of the boat or for backtrolling?
  

  Yes, by removing the screw and nut at the base of the control box the control box can be turned 180 degrees on the motor tube, then reinstall the locating screw and nut (being careful not to pinch or damage the motor wires inside the tube), tighten the screw and nut as required, and the job is complete.

• Digital Maximizer Benefits
  
  • Extended trolling time (up to 5x longer on a single charge).
  • The Digital Maximizer speed control saves valuable power over a conventional speed coil motor.
  • The Digital Maximizer allows more fishing time on your battery charge, up to five times longer run time per battery charge, compared to the 5-speed switch.
  • With variable speed control, the Digital Maximizer allows for proper speeds to be set and maintained while trolling lures for proper presentation.
  • Virtual speed adjustments for changing conditions.
  • The Digital Maxmizer allows for fine-tune speed adjustments.
  • The Digital Maximizer allows the user to control boat speed more effectively in changing environments.

• How does Digital Maximizer compare to a speed coil?
  

  How Speed Coil Motors Work

  • Electrical loads are hooked up in series with the motor so that power from the battery is split between supplying the motor and supplying the additional loads (speed coils).
  • Power from the battery is fairly constant regardless of the speed setting. Therefore, on speed 1 for example, more power is diverted to the speed coil than is supplied to the motor. This makes the overall motor assembly less efficient (vs. variable speed/Digital Maximizer).
  • Extra power consumed by the speed coil produces heat, much like an electrical heating element. The heat is then transferred through the motor housing to the water.
  • That is why speed coils are located in the lower motor unit.

• Speed Coil Analogy
  
  • You are driving a car at full speed. To slow down, you brake with one foot while continuing to keep your foot down on the gas pedal. By doing this, you continue to burn gas (power) while causing the brakes to heat up.
  • Same theory applies with a speed coil motor. The power supply is still constant, but is diverted to the speed coils for the lower speeds which reduces efficiency and run time.